Yoke System
Yoke System Upgrade for Accurate, On-The-Fly Adjustments
Instead of using a typical yoke wear plate configuration with carbon wear buttons or metal shims, Sauer have developed a yoke wear plate with a spring-loaded composite block mechanism that allows for on-the-fly adjustment of the width of the blocks.
The cut-away diagram shows the internal spring. The wear blocks are held close with an end bolt. When the composite block pieces wear down, you can simply loosen the bolt, and the pieces will spring out to compensate for the wear, and can then be bolted tight again.
The ability to make this adjustment on the fly by simply loosening and tightening two bolts means adjustments will be made more often and will be accurate.
Yoke Block
Yoke Guides
In Action!
Click "Make An Enquiry" on the right hand side to request a quote
Yoke System Upgrade Features
- Longer life of heads
- Higher quality slots
- Longer life of male and female slotting knives
- Reduced maintenance and downtime
- Longer life of yoke blocks
- Adapts to heads with worn yoke grooves
- No longer needing to purchase pricey carbon or brass buttons
- Noise reduction during production
- Easy visual inspection
- Superior material characteristics
Click "Make An Enquiry" on the right hand side to request a quote
Manufactured by Sauer System
Sauer System manufactures high-performance tooling for the corrugated box industry and is an affiliate of Sauer Machine Company. View more Sauer System solutions available through UMS, here.
